TLV3491AIDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3491 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 1.2μA |
| Max Supply Current | 1.2μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 1.2μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 69.12dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3491AIDG4 Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Push-Pull, Rail-to-Rail output is used here.This device is designed in Tube case.The device is designed with 8 terminations.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Currently, it consists of only 1 elements.The device includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator consists of 8 pins.In order to find a solution that meets your specific needs, search TLV3491 for more pin-to-pin solutions.There is 1.2μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 1.2μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1.2μA .The device can be operated with 2/5V power supplies.Electronic comparator is possible to input a maximum current of 10pA into the device.
TLV3491AIDG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
TLV3491AIDG4 Applications
There are a lot of Texas Instruments TLV3491AIDG4 linear comparators applications.
- Battery management and protection
- Power management
- Zero-Crossing Detectors
- Mobile Communications
- Battery-Powered Electronics
- Analog front end
- General-Purpose Portable Devices
- Automatic Test Equipment
- Notebooks and PDAs
- Wireless Base Stations
