TLV3491AIDR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3491 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 1.2μA |
| Output Current | 5mA |
| Max Supply Current | 1.2μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 1.2μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 69.12dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
TLV3491AIDR Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail is used for this comparator.We ship the part through Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.In total, it contains 1 elements.Electronic comparator has 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.8 pins are available on the comparator.Alternatively, you may search for TLV3491 to find more pin-to-pin solutions for your specific needs.There is 1.2μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 1.2μA .A current supply greater than 1.2μA may cause the comparator to malfunction.A power supply of 2/5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum of 10pA current into the device.With a TR package, this device is designed for general use (usually in ADC circuits).
TLV3491AIDR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
TLV3491AIDR Applications
There are a lot of Texas Instruments TLV3491AIDR linear comparators applications.
- Set Top Boxes
- Self-diagnostics
- General-Purpose Portable Devices
- Power Supervision
- Laptop Computers
- Window Comparators
- Notebooks and PDAs
- High-Speed Differential Line Receiver
- General Purpose Low Voltage Applications
- Zero-Crossing Detectors
