TLV3492AIDCNRG4
| Parameters | |
|---|---|
| Response Time | 6 μs |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 10pA |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Max Input Current | 10pA |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 1.2μA |
| Max Supply Current | 1.2μA |
| Current - Output | 5mA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 1.2μA |
TLV3492AIDCNRG4 Overview
The product is packaged in SOT-23 in order to facilitate transportation.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .The pinout of the component starts from 8 pins it has.The comparator has a pin count of 8 .A quiescent current of 1.2μA is displayed by this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current be 1.2μA in order to use the device normally.A current supply greater than 1.2μA may result in the comparator malfunctioning.There is a maximum current that can be input into the device of 10pA .Keeping the temperature below 125°C is not recommended.Lower temperatures than -40°C are unsuitable for it.5.5V is the maximum supply voltage of the comparator.The comparator is capable of operating at a minimum supply voltage of 1.8V .For the output quality to be maintained, 2 channels work together.The operating supply voltage for normal operation should be 5V .There is 5mA output current for this device.
TLV3492AIDCNRG4 Features
General Purpose IC
Quiescent Current: 1.2μA
TLV3492AIDCNRG4 Applications
There are a lot of Texas Instruments TLV3492AIDCNRG4 linear comparators applications.
- Infotainment and Clusters
- Battery-Powered Electronics
- Building automation
- Metering Systems
- Factory automation & control
- General-Purpose Portable Devices
- General-Purpose, Low-Voltage Applications
- Appliances
- Set Top Boxes
- Power Supervision
