Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
8 |
Weight |
75.891673mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
8 |
Temperature Grade |
AUTOMOTIVE |
Number of Channels |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Nominal Supply Current |
1.2μA |
Max Supply Current |
1.2μA |
Propagation Delay |
13.5 μs |
Quiescent Current |
1.2μA |
Response Time |
6 μs |
Common Mode Rejection Ratio |
74 dB |
Current - Input Bias |
10pA |
Input Offset Voltage (Vos) |
15mV |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
69.12dB |
Bias Current-Max (IIB) @25C |
0.00001μA |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
TLV3492AIDG4 Overview
Electronic comparator is packaged in SOIC for convenient transportation.As you can see, the comparator has8 terminals.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .The pinout of the component starts from 8 pins it has.This comparator has 8 pins.As a result, this comparator displays a quiescent current of 1.2μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 1.2μA supply current.A supply current exceeding 1.2μA may result in the comparator malfunctioning.Keeping the temperature below 125°C is not recommended.Temperature lower than -40°C is not suitable for the it.Compatibility is defined as 5.5V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 1.8V is allowed for this comparator.For the output quality to be maintained, 2 channels work together.
TLV3492AIDG4 Features
General Purpose IC
Quiescent Current: 1.2μA
TLV3492AIDG4 Applications
There are a lot of Texas Instruments TLV3492AIDG4 linear comparators applications.
- Window Comparators, Multivibrators
- Portable and Battery-Powered Systems
- Handheld Instruments
- High-Speed Differential Line Receiver
- Infotainment & cluster
- Zero-Crossing Detectors
- Consumer Medical Electronics
- Window Comparators
- Analog front end
- Lithium ion battery monitoring