TLV3492AMDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3491 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 2.1μA |
| Max Supply Current | 2.1μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 2.1μA |
| Response Time | 1200 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 69.12dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3492AMDREP Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Push-Pull, Rail-to-Rail output.Ready for shipping in Tape & Reel (TR) package.There are 8 terminals on the comparator.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.The pinout of the component starts from 8 pins it has.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -55°C~125°C in order to prevent malfunctions.The comparator consists of 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLV3491 .As a result, this comparator displays a quiescent current of 2.1μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 2.1μA .The compartator could be damaged if the current supply exceeds 2.1μA .Input current to the device is limited to 10pA .This device is usually used in ADC circuits (packaged in TR ).
TLV3492AMDREP Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.1μA
TLV3492AMDREP Applications
There are a lot of Texas Instruments TLV3492AMDREP linear comparators applications.
- Wearable Devices
- Ultra-Low Power Systems
- High-Speed Sampling Circuits
- Portable and Battery-Powered Systems
- Limit Comparators
- General-Purpose, Low-Voltage Applications
- Simple Analog-to-Digital Converters (ADCs)
- Lithium ion battery monitoring
- Security Detection Systems
- Consumer Medical Electronics
