TLV3494AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLV3494 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 1.2μA |
| Output Current | 5mA |
| Max Supply Current | 1.2μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 1.2μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 69.12dB |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 69.12dB PSRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3494AIPWR Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.Electronic comparator is shipped by Tape & Reel (TR) .14 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has a total of 4 elements.A total of 14 pins are included.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator has a pin count of 14 .Search TLV3494 to find more pin-to-pin solutions.There is 1.2μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 1.2μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.2μA .2/5V power supplies are enough to run the device.Packed in TR , this device is for general uses (often in ADC circuits).
TLV3494AIPWR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
TLV3494AIPWR Applications
There are a lot of Texas Instruments TLV3494AIPWR linear comparators applications.
- General Purpose Low Voltage Applications
- Laptop Computers
- Window Comparators
- Battery management and protection
- Motor drives
- Security Detection Systems
- Notebooks and PDAs
- Zero-Crossing Detectors
- Building automation
- Current and voltage sensing
