banner_page

TLV3494AIPWT

Surface Mount Cut Tape (CT) 5mA mA 12000 ns μs Linear Comparators 10pA pA 1.2μA μA 15mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3494AIPWT
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 969
  • Description: Surface Mount Cut Tape (CT) 5mA mA 12000 ns μs Linear Comparators 10pA pA 1.2μA μA 15mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number TLV3494
Pin Count 14
Output Type CMOS, Push-Pull, Rail-to-Rail
Number of Elements 4
Power Supplies 2/5V
Nominal Supply Current 1.2μA
Output Current 5mA
Max Supply Current 1.2μA
Propagation Delay 13.5 μs
Quiescent Current 1.2μA
Response Time 12000 ns
Common Mode Rejection Ratio 74 dB
Voltage - Supply, Single/Dual (±) 1.8V~5.5V
Input Offset Voltage (Vos) 15mV
Average Bias Current-Max (IIB) 0.00001μA
Power Supply Rejection Ratio (PSRR) 69.12dB
Supply Voltage Limit-Max 5.5V
Max Input Current 10pA
Input Bias Current 10pA
Voltage - Input Offset (Max) 15mV @ 5.5V
Current - Input Bias (Max) 10pA @ 5.5V
CMRR, PSRR (Typ) 74dB CMRR, 69.12dB PSRR
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV3494AIPWT Overview


A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .A comparator with a CMOS, Push-Pull, Rail-to-Rail output is used here.Electronic comparator is shipped by Cut Tape (CT) .There are 14 terminals on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .This element consists of 4 elements in total.The device contains 14 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.There are 14 pins on the comparator.Search TLV3494 to find more pin-to-pin solutions.The comparator displays a quiescent current of 1.2μA .The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 1.2μA for normal use.Current supply exceeding 1.2μA could cause disfunction of the compartator.2/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum current of 10pA into the device.This device can be used in general (for example, in ADC circuits). It is packaged in TR .

TLV3494AIPWT Features


CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA

TLV3494AIPWT Applications


There are a lot of Texas Instruments TLV3494AIPWT linear comparators applications.

  • General Purpose Low Voltage Applications
  • Self-diagnostics
  • Ultra-Low Power Systems
  • Window Comparators, Multivibrators
  • DC/DC and AC/DC power supplies
  • Analog front end
  • Mobile Phones
  • General-Purpose Portable Devices
  • Mobile Phones and Tablets
  • Set Top Boxes

Write a review

Note: HTML is not translated!
    Bad           Good