TLV3501AIDBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV3501 |
| Pin Count | 6 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 5mA |
| Output Current | 74mA |
| Max Supply Current | 5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 5mA |
| Response Time | 7.5 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Input Offset Voltage (Vos) | 6.5mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 6.5mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| Hysteresis | 6mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 100dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3501AIDBVRG4 Overview
Electronic comparator is packaged in SOT-23-6 for convenient transportation.The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.Ready for shipping in Tape & Reel (TR) package.The comparator has 6 terminals.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 1 elements.Electronic comparator includes 6 pins.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.6 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3501 .In this comparator, the quiescent current is 5mA .Mounting on PCBs or other boards is easy with the Surface Mount .The nominal supply current of the device should be 5mA for normal use.A current supply greater than 5mA may cause the comparator to malfunction.A power supply of 3/5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum current of 10pA into the device.Often found in ADC circuits, this device is packed in TR .
TLV3501AIDBVRG4 Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5mA
TLV3501AIDBVRG4 Applications
There are a lot of Texas Instruments TLV3501AIDBVRG4 linear comparators applications.
- Appliances
- High-Speed Sampling Circuits
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Limit Comparators
- Infotainment & cluster
- Automatic Test Equipment
- Power management
- Mobile Communications
- Lithium ion battery monitoring
