TLV3501AIDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3501 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 5mA |
| Output Current | 74mA |
| Max Supply Current | 5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 5mA |
| Response Time | 7.5 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Input Offset Voltage (Vos) | 6.5mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 6.5mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| Hysteresis | 6mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 100dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3501AIDG4 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.The chip is packaged with Tube .The comparator has 8 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In general, the chip type can be classified as General Purpose .The total number of elements is 1 .The pinout of the component starts from 8 pins it has.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.This comparator has 8 pins.In order to find a solution that meets your specific needs, search TLV3501 for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 5mA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 5mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 5mA .This device requires 3/5V power supplies to operate.
TLV3501AIDG4 Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5mA
TLV3501AIDG4 Applications
There are a lot of Texas Instruments TLV3501AIDG4 linear comparators applications.
- Battery-Powered Electronics
- Notebooks and PDAs
- Metering Systems
- Laptop Computers
- DC/DC and AC/DC power supplies
- Appliances
- Motor drives
- Simple Analog-to-Digital Converters (ADCs)
- Limit Comparators
- Consumer Medical Electronics
