TLV3501AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3501 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 5mA |
| Output Current | 74mA |
| Max Supply Current | 5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 5mA |
| Response Time | 7.5 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Input Offset Voltage (Vos) | 6.5mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 6.5mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| Hysteresis | 6mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 100dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3501AIDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The chip is packaged with Tape & Reel (TR) .You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 1 elements in total.A total of 8 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator has 8 pins.If you require more pin-to-pin solutions, search TLV3501 for more options.The comparator presents a quiescent current of 5mA volts.The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 5mA for normal use.Current supply exceeding 5mA could cause disfunction of the compartator.There is sufficient power to run the device from 3/5V power supplies.Electronic comparator is possible to input a maximum current of 10pA into the device.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV3501AIDR Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5mA
TLV3501AIDR Applications
There are a lot of Texas Instruments TLV3501AIDR linear comparators applications.
- Current and voltage sensing
- Ultra-Low Power Systems
- Limit Comparators
- Lithium ion battery monitoring
- Wide Range VCO; MOS Clock Timers
- Building automation
- Threshold Detectors
- System control and monitoring
- Portable and Battery-Powered Systems
- High-Speed Differential Line Receiver
