banner_page

TLV3502AIDG4

Surface Mount Tube 74mA mA 7.5 ns μs Linear Comparators 10pA pA 5mA μA 6.5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3502AIDG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 694
  • Description: Surface Mount Tube 74mA mA 7.5 ns μs Linear Comparators 10pA pA 5mA μA 6.5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLV3502
Pin Count 8
Output Type CMOS, Push-Pull, Rail-to-Rail, TTL
Operating Supply Voltage 5V
Number of Elements 2
Nominal Supply Current 5mA
Output Current 74mA
Max Supply Current 5mA
Propagation Delay 10 ns
Quiescent Current 5mA
Response Time 7.5 ns
Common Mode Rejection Ratio 70 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±1.35V~2.75V
Input Offset Voltage (Vos) 6.5mV
Average Bias Current-Max (IIB) 0.00001μA
Power Supply Rejection Ratio (PSRR) 100dB
Input Bias Current 10pA
Voltage - Input Offset (Max) 6.5mV @ 5.5V
Current - Input Bias (Max) 10pA @ 5.5V
Hysteresis 6mV
CMRR, PSRR (Typ) 70dB CMRR, 100dB PSRR
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV3502AIDG4 Overview


A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.As a result, it is designed with Tube package.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .This element consists of 2 elements in total.The device is equipped with 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3502 .As a result, this comparator displays a quiescent current of 5mA .The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires a nominal supply current of 5mA .The compartator could be damaged if the current supply exceeds 5mA .For normal operation, there should be 5V operating supply voltage applied.

TLV3502AIDG4 Features


CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 5mA

TLV3502AIDG4 Applications


There are a lot of Texas Instruments TLV3502AIDG4 linear comparators applications.

  • Ultra-Low Power Systems
  • Portable Battery Monitoring
  • Zero-Crossing Detectors
  • Mobile Phones
  • Battery-Powered Electronics
  • Metering Systems
  • Portable and Battery-Powered Systems
  • DC/DC and AC/DC power supplies
  • Limit Comparators
  • Infotainment and Clusters

Write a review

Note: HTML is not translated!
    Bad           Good