Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLV3502 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
5mA |
Output Current |
74mA |
Max Supply Current |
5mA |
Propagation Delay |
10 ns |
Quiescent Current |
5mA |
Response Time |
7.5 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±1.35V~2.75V |
Input Offset Voltage (Vos) |
6.5mV |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Supply Voltage Limit-Max |
5.5V |
Max Input Current |
10pA |
Input Bias Current |
10pA |
Voltage - Input Offset (Max) |
6.5mV @ 5.5V |
Current - Input Bias (Max) |
10pA @ 5.5V |
Hysteresis |
6mV |
CMRR, PSRR (Typ) |
70dB CMRR, 100dB PSRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3502AIDR Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 2 elements in it.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .This comparator has 8 pins.You can search TLV3502 if you are looking for more pin-to-pin solutions.A quiescent current of 5mA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 5mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 5mA .In order to run the device, there are only 3/5V power supplies required.Electronic comparator is possible to input a maximum current of 10pA into the device.The device is acceptable to pack by TR .
TLV3502AIDR Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 5mA
TLV3502AIDR Applications
There are a lot of Texas Instruments TLV3502AIDR linear comparators applications.
- High-Speed Sampling Circuits
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones
- Lithium ion battery monitoring
- Alarm and Monitoring Circuits
- Security Detection Systems
- Power Supervision
- Handheld Instruments
- System control and monitoring
- Wearable Devices