banner_page

TLV3701CD

Surface Mount Tube 10mA mA 36 μs μs Linear Comparators 120dB dB 250pA pA 800nA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3701CD
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 557
  • Description: Surface Mount Tube 10mA mA 36 μs μs Linear Comparators 120dB dB 250pA pA 800nA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Max Power Dissipation 710mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Base Part Number TLV3701
Pin Count 8
Output Type CMOS, Push-Pull, Rail-to-Rail
Number of Elements 1
Nominal Supply Current 800nA
Power Dissipation 710mW
Output Current 10mA
Max Supply Current 800nA
Quiescent Current 1μA
Response Time 36 μs
Common Mode Rejection Ratio 88 dB
Voltage - Supply, Single/Dual (±) 2.5V~16V ±1.25V~8V
Input Offset Voltage (Vos) 5mV
Voltage Gain 120dB
Power Supply Rejection Ratio (PSRR) 105dB
Input Bias Current 250pA
Voltage - Input Offset (Max) 5mV @ 15V
Current - Input Bias (Max) 250pA @ 15V
CMRR, PSRR (Typ) 88dB CMRR, 105dB PSRR
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV3701CD Overview


In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail is used for this comparator.As a result, it is designed with Tube package.The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.The type of the chip can be classified as General Purpose .There are a total of 1 elements in it.The device includes 8 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLV3701 .The comparator displays a quiescent current of 1μA .The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 800nA .A current supply greater than 800nA may result in the comparator malfunctioning.Based on the voltage formula, the voltage gain of the part is 120dB .

TLV3701CD Features


CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB

TLV3701CD Applications


There are a lot of Texas Instruments TLV3701CD linear comparators applications.

  • Portable Battery Monitoring
  • Laptop Computers
  • Current and voltage sensing
  • Point of load regulators
  • Building automation
  • Handheld Instruments
  • Metering Systems
  • Power management
  • Consumer Medical Electronics
  • Battery-Powered Electronics

Write a review

Note: HTML is not translated!
    Bad           Good