TLV3701CDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3701 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701CDBVR Overview
For convenience, it is packaged in SC-74A, SOT-753 .This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.As a result, it is designed with Tape & Reel (TR) package.The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 2.7V .This is a typical comparator of type General Purpose .This is a 1 element comparator.The device is equipped with 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .5 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLV3701 .A quiescent current of 1μA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 800nA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 800nA .Electronic comparator is possible to input a maximum current of 250pA into the device.In accordance with the voltage formula, the part's voltage gain is 120dB .The device is packaged in TR and is often used in ADC circuits.
TLV3701CDBVR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701CDBVR Applications
There are a lot of Texas Instruments TLV3701CDBVR linear comparators applications.
- Notebooks and PDAs
- DC/DC and AC/DC power supplies
- Set Top Boxes
- Automotive
- Metering Systems
- Hand-Held Electronics
- Security Detection Systems
- Laptop Computers
- Mobile Communications
- Infotainment and Clusters
