TLV3701CDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3701 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701CDBVT Overview
For convenience, it is packaged in SC-74A, SOT-753 .Output type CMOS, Push-Pull, Rail-to-Rail is used for this comparator.The part will be shipped by Cut Tape (CT) .The comparator has a total of 5 terminals.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.The device includes 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.5 pins are available on the comparator.If you require more pin-to-pin solutions, search TLV3701 for more options.The comparator presents a quiescent current of 1μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 800nA .A current supply greater than 800nA may result in the comparator malfunctioning.A maximum current of 250pA can be supplied to the device.Comparator electronics follows that the voltage gain of the part is 120dB .Comparator electronics is necessary to have a voltage of 15V for normal operation.Often found in ADC circuits, this device is packed in TR .
TLV3701CDBVT Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701CDBVT Applications
There are a lot of Texas Instruments TLV3701CDBVT linear comparators applications.
- General Purpose Low Voltage Applications
- Current and voltage sensing
- Infotainment and Clusters
- Alarm and Monitoring Circuits
- Window Comparators
- Portable Battery Monitoring
- Limit Comparators
- Consumer Medical Electronics
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
