TLV3701CDG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Pin Count | 8 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Power Dissipation-Max | 710mW |
| Nominal Supply Current | 800nA |
| Power Dissipation | 710mW |
| Max Supply Current | 800nA |
| Current - Output | 10mA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV3701CDG4 Overview
A convenient packaging is provided in the form of SOIC .Ready for shipping in Rail/Tube package.The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 2.7V voltage can complete many demanding tasks.Speaking of types, this is a typical General Purpose comparator.The device contains 8 pins.The comparator consists of 8 pins.There is a quiescent current of 1μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 800nA in order to use the device normally.Current supply exceeding 800nA could cause disfunction of the compartator.From the voltage formula, the voltage gain of the part is 120dB .Keeping the temperature below 70°C is not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .Compatibility is defined as 16V when the comparator is operating at its maximum supply voltage.Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 2.5V .For the output quality to be maintained, 1 channels work together.Its output current is rated as 10mA .
TLV3701CDG4 Features
General Purpose IC
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701CDG4 Applications
There are a lot of Texas Instruments TLV3701CDG4 linear comparators applications.
- Motor drives
- Infotainment and Clusters
- Industrial
- Mobile Phones
- Point of load regulators
- System control and monitoring
- Wearable Devices
- Power management
- Mobile Communications
- General Purpose Low Voltage Applications
