TLV3701ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3701 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701ID Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail output type for this comparator.This chip is designed with the Tube package.There are8 terminals on the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 1 .There are 8 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator has a pin count of 8 .Search TLV3701 to find more pin-to-pin solutions.There is a quiescent current of 1μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 800nA supply current.If the current supply exceeds 800nA , the comparator could malfunction.The maximal current your can input into the device is 250pA .According to the voltage formula, the part has a voltage gain of 120dB .Normal operation requires 15V operating supply voltage.
TLV3701ID Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701ID Applications
There are a lot of Texas Instruments TLV3701ID linear comparators applications.
- Power management
- High-Speed Sampling Circuits
- Pulse, Squarewave, and Time Delay Generators
- Body Control Modules
- General Purpose Low Voltage Applications
- DC/DC and AC/DC power supplies
- Set Top Boxes
- Motor drives
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
