TLV3701IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3701 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Channels | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Current - Output (Typ) | 10mA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701IDBVT Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.This device is designed in Cut Tape (CT) case.As you can see, the comparator has5 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as General Purpose .The device includes 5 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator consists of 5 pins.Try search TLV3701 to get more pin-to-pin solutions for your special needs.A quiescent current of 1μA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 800nA when using the device.An excess of current supply over 800nA could result in malfunction of the comparator.You are allowed to input a maximum current of 250pA into the device.Based on the voltage formula, the voltage gain of the part is 120dB .The output quality is maintained by the cooperation of 1 channels.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLV3701IDBVT Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701IDBVT Applications
There are a lot of Texas Instruments TLV3701IDBVT linear comparators applications.
- DC/DC and AC/DC power supplies
- Battery-Powered Electronics
- Security Detection Systems
- Laptop Computers
- High-Speed Differential Line Receiver
- Self-diagnostics
- Portable and Battery-Powered Systems
- Current and voltage sensing
- Window Comparators
- Zero-Crossing Detectors
