TLV3701IDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3701 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701IDBVTG4 Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has a type CMOS, Push-Pull, Rail-to-Rail output.As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has5 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical General Purpose comparator.This element consists of 1 elements in total.The device contains 5 pins.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator has 5 pins.Search TLV3701 to find more pin-to-pin solutions.A quiescent current of 1μA is displayed by this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 800nA .An excess of current supply over 800nA could result in malfunction of the comparator.Input current to the device cannot exceed 250pA .According to the voltage formula, the part has a voltage gain of 120dB .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV3701IDBVTG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701IDBVTG4 Applications
There are a lot of Texas Instruments TLV3701IDBVTG4 linear comparators applications.
- Security Detection Systems
- Threshold Detectors
- High-Speed Differential Line Receiver
- Industrial
- Window Comparators, Multivibrators
- Alarm and Monitoring Circuits
- Simple Analog-to-Digital Converters (ADCs)
- Analog front end
- Wide Range VCO; MOS Clock Timers
- Portable and Battery-Powered Systems
