TLV3701IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3701 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701IDR Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail output type for this comparator.This device is designed in Tape & Reel (TR) case.There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .A total of 1 elements can be found in it.The pinout of the component starts from 8 pins it has.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3701 .The comparator displays a quiescent current of 1μA .A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 800nA .A current supply greater than 800nA may cause the comparator to malfunction.The voltage formula shows that the part has a voltage gain of 120dB .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV3701IDR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701IDR Applications
There are a lot of Texas Instruments TLV3701IDR linear comparators applications.
- Consumer Medical Electronics
- Power Supervision
- Zero-Crossing Detectors
- Laptop Computers
- Wearable Devices
- Hand-Held Electronics
- Set Top Boxes
- Infotainment & cluster
- Portable Battery Monitoring
- General Purpose Low Voltage Applications
