TLV3701IDRG4
| Parameters | |
|---|---|
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 710mW |
| Nominal Supply Current | 800nA |
| Power Dissipation | 710mW |
| Max Supply Current | 800nA |
| Current - Output | 10mA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.35V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Max Input Current | 250pA |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
TLV3701IDRG4 Overview
The product is packaged in SOIC in order to facilitate transportation.This device is designed in Tape and Reel case.The device is designed with 8 terminations.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type General Purpose .There are 8 pins on this board.There are 8 pins on the comparator.There is a quiescent current of 1μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 800nA .Current supply exceeding 800nA could cause disfunction of the compartator.You can input a maximum current of 250pA into this device.The voltage formula shows that the part has a voltage gain of 120dB .Temperature higher than 125°C is not recommended.A temperature below -40°C is not suitable for the device.A comparator's maximum supply voltage is 16V .Using a voltage as low as 2.7V is possible for this comparator.To ensure a high level of output quality, 1 channels work together.There is 10mA output current for this device.
TLV3701IDRG4 Features
General Purpose IC
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701IDRG4 Applications
There are a lot of Texas Instruments TLV3701IDRG4 linear comparators applications.
- Point of load regulators
- Portable Battery Monitoring
- Factory automation & control
- Automatic Test Equipment
- Wide Range VCO; MOS Clock Timers
- General-Purpose, Low-Voltage Applications
- Laptop Computers
- Set Top Boxes
- Power management
- Battery management and protection
