TLV3701IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLV3701 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 1.2W |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701IP Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.This device is designed in Tube case.The comparator has 8 terminals.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical General Purpose comparator.Electronic comparator consists of 1 elements in total.The board includes 8 pins.The recommended mounting method is Through Hole .The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions by searching TLV3701 .As a result, this comparator displays a quiescent current of 1μA .The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current be 800nA in order to use the device normally.The compartator could be damaged if the current supply exceeds 800nA .Input current to the device is limited to 250pA .Based on the voltage formula, the voltage gain of the part is 120dB .Comparator electronics is necessary to have an operating supply voltage of 9V for normal operation.
TLV3701IP Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701IP Applications
There are a lot of Texas Instruments TLV3701IP linear comparators applications.
- General Purpose Low Voltage Applications
- Security Detection Systems
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- Battery-Powered Electronics
- Window Comparators
- Portable Battery Monitoring
- Motor drives
- Self-diagnostics
- Mobile Communications
