Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
13.012431mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
385mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV3701 |
Pin Count |
5 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Number of Elements |
1 |
Nominal Supply Current |
800nA |
Power Dissipation |
385mW |
Output Current |
10mA |
Max Supply Current |
800nA |
Propagation Delay |
240 μs |
Quiescent Current |
1.2μA |
Response Time |
36000 ns |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
105dB |
Max Input Current |
250pA |
Input Bias Current |
250pA |
Current - Quiescent (Max) |
1.2μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
250pA @ 5V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3701QDBVREP Overview
To facilitate transportation, it comes packaged in SC-74A, SOT-753 .A comparator with a CMOS, Push-Pull, Rail-to-Rail output is used here.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 5 terminals.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.This is a 1 element comparator.The device includes 5 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 5 pins.If you require more pin-to-pin solutions, search TLV3701 for more options.In this comparator, the quiescent current is 1.2μA .The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 800nA supply current.The compartator could be damaged if the current supply exceeds 800nA .Electronic comparator is possible to input a maximum of 250pA current into the device.In accordance with the voltage formula, the part's voltage gain is 120dB .The device is packaged in TR and is often used in ADC circuits.
TLV3701QDBVREP Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
Voltage Gain: 120dB
TLV3701QDBVREP Applications
There are a lot of Texas Instruments TLV3701QDBVREP linear comparators applications.
- Wireless Base Stations
- Battery-Powered Electronics
- Handheld Instruments
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
- Analog front end
- DC/DC and AC/DC power supplies
- Simple Analog-to-Digital Converters (ADCs)
- System control and monitoring
- Consumer Medical Electronics