TLV3701QDBVRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3701 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Propagation Delay | 240 μs |
| Quiescent Current | 1.2μA |
| Response Time | 240000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 250pA @ 5V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701QDBVRG4Q1 Overview
Electronic comparator is packaged in SC-74A, SOT-753 for convenient transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .The part is shipped by Tape & Reel (TR) .There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.When it comes to types, this comparator is a typical General Purpose .In total, it contains 1 elements.A total of 5 pins are included.The recommended mounting method is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .There are 5 pins on the comparator.You can search TLV3701 if you are looking for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 1.2μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 800nA .Current supply exceeding 800nA could cause disfunction of the compartator.There is a maximum current that can be input into the device of 250pA .In accordance with the voltage formula, the part's voltage gain is 120dB .The part belongs to the Automotive, AEC-Q100 series of comparator parts.Packed in TR , this device is for general uses (often in ADC circuits).
TLV3701QDBVRG4Q1 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
Voltage Gain: 120dB
TLV3701QDBVRG4Q1 Applications
There are a lot of Texas Instruments TLV3701QDBVRG4Q1 linear comparators applications.
- Portable Battery Monitoring
- Security Detection Systems
- Zero-Crossing Detectors
- Mobile Communications
- Point of load regulators
- Pulse, Squarewave, and Time Delay Generators
- Hand-Held Electronics
- General Purpose Low Voltage Applications
- Power Supervision
- Handheld Instruments
