TLV3701QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3701 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Propagation Delay | 240 μs |
| Quiescent Current | 1.2μA |
| Response Time | 240000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 250pA @ 5V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3701QDBVRQ1 Overview
For convenience, it is packaged in SC-74A, SOT-753 .This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.Ready for shipping in Cut Tape (CT) package.You can find 5 terminals of the comparator.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as General Purpose .In total, it contains 1 elements.The device is equipped with 5 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator consists of 5 pins.If you require more pin-to-pin solutions, search TLV3701 for more options.A quiescent current of 1.2μA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 800nA .If the current supply exceeds 800nA , the comparator could malfunction.Input current to the device cannot exceed 250pA .The voltage gain of the part is indicated by 120dB in the voltage formula.The part is based on Automotive, AEC-Q100 .The device is packaged in TR and is often used in ADC circuits.
TLV3701QDBVRQ1 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
Voltage Gain: 120dB
TLV3701QDBVRQ1 Applications
There are a lot of Texas Instruments TLV3701QDBVRQ1 linear comparators applications.
- Battery management and protection
- High-Speed Differential Line Receiver
- Hand-Held Electronics
- Analog front end
- Mobile Phones
- RC Timers
- Threshold Detectors
- Body Control Modules
- Notebooks and PDAs
- Window Comparators
