TLV3702CDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 481mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 481mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3702CDGK Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .This device is designed in Tube case.You can find 8 terminals of the comparator.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TLV3702 .A quiescent current of 1μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 800nA supply current.A supply current exceeding 800nA may result in the comparator malfunctioning.From the voltage formula, the voltage gain of the part is 120dB .A normal operation requires a voltage of 15V .
TLV3702CDGK Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3702CDGK Applications
There are a lot of Texas Instruments TLV3702CDGK linear comparators applications.
- Battery management and protection
- System control and monitoring
- Motor drives
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Metering Systems
- Simple Analog-to-Digital Converters (ADCs)
- RC Timers
- DC/DC and AC/DC power supplies
- Power management
