Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
18.99418mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
481mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLV3702 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Operating Supply Voltage |
15V |
Number of Elements |
2 |
Nominal Supply Current |
800nA |
Power Dissipation |
481mW |
Output Current |
10mA |
Max Supply Current |
800nA |
Quiescent Current |
1μA |
Response Time |
36 μs |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~16V ±1.25V~8V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
105dB |
Supply Voltage Limit-Max |
17V |
Dual Supply Voltage |
5V |
Input Bias Current |
250pA |
Voltage - Input Offset (Max) |
5mV @ 15V |
Current - Input Bias (Max) |
250pA @ 15V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3702CDGKG4 Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.The part is shipped by Tube .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.A comparator supplied with 2.7V voltage can complete many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.Electronic comparator includes 8 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching TLV3702 .This comparator presents a quiescent current of 1μA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current be 800nA in order to use the device normally.A supply current exceeding 800nA may result in the comparator malfunctioning.In accordance with the voltage formula, the part's voltage gain is 120dB .The operating supply voltage for normal operation should be 15V .
TLV3702CDGKG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3702CDGKG4 Applications
There are a lot of Texas Instruments TLV3702CDGKG4 linear comparators applications.
- Portable and Battery-Powered Systems
- Mobile Communications
- Automatic Test Equipment
- Laptop Computers
- Wireless Base Stations
- General Purpose Low Voltage Applications
- Automotive
- Battery-Powered Electronics
- Building automation
- Hand-Held Electronics