TLV3702CDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 481mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 481mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3702CDGKR Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .This device is designed in Tape & Reel (TR) case.You can find 8 terminals of the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.This is a typical comparator of type General Purpose .There are a total of 2 elements in it.A total of 8 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator has a pin count of 8 .If you require more pin-to-pin solutions, search TLV3702 for more options.The comparator presents a quiescent current of 1μA volts.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 800nA .If the current supply exceeds 800nA , the comparator might be damaged.Electronic comparator is possible to input a maximum of 250pA current into the device.From the voltage formula, the voltage gain of the part is 120dB .Comparator electronics is acceptable to pack the device by TR .
TLV3702CDGKR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3702CDGKR Applications
There are a lot of Texas Instruments TLV3702CDGKR linear comparators applications.
- High-Speed Sampling Circuits
- Mobile Communications
- Battery-Powered Electronics
- RC Timers
- Mobile Phones
- General Purpose Low Voltage Applications
- Metering Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Industrial
- Motor drives
