TLV3702CDGKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 481mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 481mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3702CDGKRG4 Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.The type of the chip can be classified as General Purpose .Electronic comparator has a total of 2 elements.The device is equipped with 8 pins.A Surface Mount mounting type is recommended.The operating temperature should be set to 0°C~70°C to avoid mal-function.8 pins are available on the comparator.If you require more pin-to-pin solutions, search TLV3702 for more options.A quiescent current of 1μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 800nA in order to use the device normally.A supply current exceeding 800nA may result in the comparator malfunctioning.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 120dB .The device is acceptable to pack by TR .
TLV3702CDGKRG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3702CDGKRG4 Applications
There are a lot of Texas Instruments TLV3702CDGKRG4 linear comparators applications.
- Building automation
- Lithium ion battery monitoring
- Point of load regulators
- DC/DC and AC/DC power supplies
- Notebooks and PDAs
- Body Control Modules
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Mobile Phones
- Factory automation & control
