TLV3702ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLV3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 1.6μA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3702ID Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.This device is designed in Tube case.8 terminals are found on the comparator.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.This is a 2 element comparator.The board includes 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLV3702 for more pin-to-pin solutions.A quiescent current of 1μA is displayed by this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 1.6μA .Current supply exceeding 800nA could cause disfunction of the compartator.The maximal current your can input into the device is 250pA .The voltage formula shows that the part has a voltage gain of 120dB .
TLV3702ID Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3702ID Applications
There are a lot of Texas Instruments TLV3702ID linear comparators applications.
- Laptop Computers
- Set Top Boxes
- Battery-Powered Electronics
- Current and voltage sensing
- Ultra-Low Power Systems
- Power Supervision
- Power management
- Portable and Battery-Powered Systems
- Building automation
- Mobile Phones and Tablets
