TLV3702IDGK
| Parameters | |
|---|---|
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 481mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Nominal Supply Current | 1.6μA |
| Power Dissipation | 481mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
TLV3702IDGK Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.There is a CMOS, Push-Pull, Rail-to-Rail output type for this comparator.The chip is packaged with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical General Purpose comparator.There are a total of 2 elements in it.The board includes 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.8 pins are present on the comparator.Alternatively, you may search for TLV3702 to find more pin-to-pin solutions for your specific needs.The comparator displays a quiescent current of 1μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 1.6μA .A supply current exceeding 800nA may result in the comparator malfunctioning.From the voltage formula, the voltage gain of the part is 120dB .Comparator electronics is necessary to have an operating supply voltage of 15V for normal operation.
TLV3702IDGK Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3702IDGK Applications
There are a lot of Texas Instruments TLV3702IDGK linear comparators applications.
- Infotainment & cluster
- Handheld Instruments
- Limit Comparators
- Window Comparators
- Notebooks and PDAs
- Multivibrators and High-Voltage Digital Logic Gates
- DC/DC and AC/DC power supplies
- Alarm and Monitoring Circuits
- Set Top Boxes
- Analog front end
