TLV3702QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLV3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 710mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Propagation Delay | 240 μs |
| Quiescent Current | 1.2μA |
| Response Time | 240000 ns |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 250pA @ 5V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3702QDRQ1 Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail output type for this comparator.The part will be shipped by Cut Tape (CT) .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .This element consists of 2 elements in total.The device includes 8 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .8 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLV3702 for more pin-to-pin solutions.A quiescent current of 1.2μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 800nA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 800nA .A maximum current of 250pA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 120dB .Comparator electronics is a comparator part from the Automotive, AEC-Q100 series.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV3702QDRQ1 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
Voltage Gain: 120dB
TLV3702QDRQ1 Applications
There are a lot of Texas Instruments TLV3702QDRQ1 linear comparators applications.
- Security Detection Systems
- Power management
- Appliances
- Notebooks and PDAs
- General-Purpose, Low-Voltage Applications
- Consumer Medical Electronics
- Wireless Base Stations
- RC Timers
- Metering Systems
- Window Comparators, Multivibrators
