TLV3704CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.022W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-8/2.5/16V |
| Nominal Supply Current | 3.2μA |
| Power Dissipation | 1.022W |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3704CD Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail output on this device.This chip is designed with the Tube package.As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.The device includes 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator consists of 14 pins.Try search TLV3704 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 1μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 3.2μA in order to use the device normally.Current supply exceeding 800nA could cause disfunction of the compartator.A power supply of +-1.25/+-8/2.5/16V is sufficient for the operation of the device.There is a maximum current that can be input into the device of 250pA .The voltage formula shows that the part has a voltage gain of 120dB .Comparator electronics is necessary to have a voltage of 15V for normal operation.
TLV3704CD Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704CD Applications
There are a lot of Texas Instruments TLV3704CD linear comparators applications.
- Self-diagnostics
- Appliances
- Handheld Instruments
- DC/DC and AC/DC power supplies
- Factory automation & control
- Mobile Phones
- Threshold Detectors
- Security Detection Systems
- Analog front end
- Power management
