TLV3704CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 720mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-8/2.5/16V |
| Nominal Supply Current | 3.2μA |
| Power Dissipation | 720mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3704CPW Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail output on this device.The part will be shipped by Tube .14 terminals are found on the comparator.The electrical component here belongs to the Comparator family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .In total, it contains 4 elements.The device is equipped with 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 14 pins.In order to find a solution that meets your specific needs, search TLV3704 for more pin-to-pin solutions.This comparator presents a quiescent current of 1μA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 3.2μA .The compartator could be damaged if the current supply exceeds 800nA .A power supply of +-1.25/+-8/2.5/16V is sufficient for the operation of the device.A voltage gain of 120dB can be determined from the voltage formula for the part.
TLV3704CPW Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704CPW Applications
There are a lot of Texas Instruments TLV3704CPW linear comparators applications.
- Body Control Modules
- Laptop Computers
- Threshold Detectors
- Zero-Crossing Detectors
- Limit Comparators
- Automotive
- Handheld Instruments
- Motor drives
- Hand-Held Electronics
- Appliances
