TLV3704CPWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Power Dissipation-Max | 720mW |
| Nominal Supply Current | 800nA |
| Power Dissipation | 720mW |
| Max Supply Current | 800nA |
| Current - Output | 10mA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV3704CPWG4 Overview
For convenience, it is packaged in TSSOP .This device is designed in Rail/Tube case.As you can see, the comparator has14 terminals.The component belongs to the Comparator family of electrical components.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .The device includes 14 pins.Electronic comparator has 14 pins.This comparator presents a quiescent current of 1μA .The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 800nA supply current.An excess of current supply over 800nA could result in malfunction of the comparator.According to the voltage formula, the part has a voltage gain of 120dB .Temperature higher than 70°C is not recommended.Comparator electronics cannot be operated at temperatures below 0°C .The maximal supply voltage of the comparator is 16V .This comparator can be supplied with a voltage as low as 2.5V .To ensure a high level of output quality, 4 channels work together.Comparator electronics has an output current rated at 10mA .
TLV3704CPWG4 Features
General Purpose IC
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704CPWG4 Applications
There are a lot of Texas Instruments TLV3704CPWG4 linear comparators applications.
- Power management
- Mobile Phones and Tablets
- System control and monitoring
- Window Comparators, Multivibrators
- Current and voltage sensing
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Analog front end
- Infotainment and Clusters
- Motor drives
