TLV3704ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.022W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Nominal Supply Current | 3.2μA |
| Power Dissipation | 1.022W |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3704ID Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.This device is designed in Tube case.Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a part of Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Speaking of types, this is a typical General Purpose comparator.A total of 4 elements can be found in it.Electronic comparator includes 14 pins.The recommended mounting method is Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 14 pins on the comparator.You can search TLV3704 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 1μA .There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 3.2μA for normal use.A supply current exceeding 800nA may result in the comparator malfunctioning.The device can be powered by +-1.35/+-8/2.7/16V power supplies.The maximal current your can input into the device is 250pA .Comparator electronics follows that the voltage gain of the part is 120dB .
TLV3704ID Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704ID Applications
There are a lot of Texas Instruments TLV3704ID linear comparators applications.
- Appliances
- Mobile Phones and Tablets
- Mobile Communications
- Factory automation & control
- Ultra-Low Power Systems
- Consumer Medical Electronics
- RC Timers
- Alarm and Monitoring Circuits
- Window Comparators
- Metering Systems
