Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
122.413241mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
1.022W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLV3704 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Number of Elements |
4 |
Power Supplies |
+-1.35/+-8/2.7/16V |
Nominal Supply Current |
800nA |
Power Dissipation |
1.022W |
Output Current |
10mA |
Max Supply Current |
800nA |
Quiescent Current |
1μA |
Response Time |
36 μs |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
105dB |
Supply Voltage Limit-Max |
17V |
Max Input Current |
250pA |
Input Bias Current |
250pA |
Voltage - Input Offset (Max) |
5mV @ 15V |
Current - Input Bias (Max) |
250pA @ 15V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3704IDG4 Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail is used for this comparator.This chip is designed with the Tube package.Electronic comparator is possible to find the 14 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.The type of the chip can be classified as General Purpose .A total of 4 elements can be found in it.A total of 14 pins are included.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 14 .In order to find a solution that meets your specific needs, search TLV3704 for more pin-to-pin solutions.In this comparator, the quiescent current is 1μA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 800nA in order to use the device normally.If the current supply exceeds 800nA , the comparator might be damaged.In order to operate the device, +-1.35/+-8/2.7/16V power supplies are sufficient.You are allowed to input a maximum current of 250pA into the device.From the voltage formula, the voltage gain of the part is 120dB .
TLV3704IDG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704IDG4 Applications
There are a lot of Texas Instruments TLV3704IDG4 linear comparators applications.
- Wearable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- General-Purpose, Low-Voltage Applications
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- High-Speed Sampling Circuits
- Current and voltage sensing
- Alarm and Monitoring Circuits
- Battery management and protection
- RC Timers