TLV3704IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 1.022W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Nominal Supply Current | 3.2μA |
| Power Dissipation | 1.022W |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 250pA |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3704IDR Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail .Ready for shipping in Cut Tape (CT) package.The comparator has 14 terminals.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.A total of 14 pins are included.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 14 pins.Alternatively, you may search for TLV3704 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 1μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.The nominal supply current of the device should be 3.2μA for normal use.An excess of current supply over 800nA could result in malfunction of the comparator.In order to operate the device, +-1.35/+-8/2.7/16V power supplies are sufficient.There is a maximum current that can be input into the device of 250pA .Based on the voltage formula, the voltage gain of the part is 120dB .The device is packaged in TR and is often used in ADC circuits.
TLV3704IDR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704IDR Applications
There are a lot of Texas Instruments TLV3704IDR linear comparators applications.
- Hand-Held Electronics
- Notebooks and PDAs
- High-Speed Sampling Circuits
- Factory automation & control
- General Purpose Low Voltage Applications
- High-Speed Differential Line Receiver
- Threshold Detectors
- Power Supervision
- Body Control Modules
- Battery-Powered Electronics
