Parameters |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
105dB |
Supply Voltage Limit-Max |
17V |
Input Bias Current |
250pA |
Voltage - Input Offset (Max) |
5mV @ 15V |
Current - Input Bias (Max) |
250pA @ 15V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
122.413241mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
1.022W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLV3704 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Number of Elements |
4 |
Power Supplies |
+-1.35/+-8/2.7/16V |
Nominal Supply Current |
800nA |
Power Dissipation |
1.022W |
Output Current |
10mA |
Max Supply Current |
800nA |
Quiescent Current |
1μA |
Response Time |
36 μs |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Input Offset Voltage (Vos) |
5mV |
TLV3704IDRG4 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail output.This chip is designed with the Tape & Reel (TR) package.14 terminals are found on the comparator.The electrical component here belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type General Purpose .There are a total of 4 elements in it.There are 14 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator is equipped with 14 pins.You may wish to search TLV3704 for more solutions that address your specific needs.The comparator presents a quiescent current of 1μA volts.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 800nA .A supply current exceeding 800nA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh +-1.35/+-8/2.7/16V power supplies.Based on the voltage formula, the voltage gain of the part is 120dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLV3704IDRG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704IDRG4 Applications
There are a lot of Texas Instruments TLV3704IDRG4 linear comparators applications.
- Analog front end
- Body Control Modules
- Motor drives
- Alarm and Monitoring Circuits
- DC/DC and AC/DC power supplies
- High-Speed Differential Line Receiver
- Point of load regulators
- System control and monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors