TLV3704INE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 1.6W |
| Nominal Supply Current | 800nA |
| Power Dissipation | 1.6W |
| Max Supply Current | 800nA |
| Current - Output | 10mA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 250pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 1.35V |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV3704INE4 Overview
A convenient packaging is provided in the form of PDIP .Electronic comparator is shipped by Rail/Tube .As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.The pinout of the component starts from 14 pins it has.The comparator is equipped with 14 pins.As a result, this comparator displays a quiescent current of 1μA .There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 800nA .An excess of current supply over 800nA could result in malfunction of the comparator.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 120dB .An increase in temperature over 125°C is not recommended.Temperatures below -40°C are not suitable for the device.The maximal supply voltage of the comparator is 16V .The comparator is capable of operating at a minimum supply voltage of 2.7V .The output quality is maintained by the cooperation of 4 channels.This device's output current is rated at 10mA .
TLV3704INE4 Features
General Purpose IC
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704INE4 Applications
There are a lot of Texas Instruments TLV3704INE4 linear comparators applications.
- Infotainment & cluster
- Window Comparators, Multivibrators
- General-Purpose, Low-Voltage Applications
- Handheld Instruments
- Wide Range VCO; MOS Clock Timers
- System control and monitoring
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Ultra-Low Power Systems
- Building automation
