banner_page

TLV3704IPWRG4

Surface Mount Tape & Reel (TR) 10mA mA 36 μs μs Linear Comparators 120dB dB 250pA pA 800nA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3704IPWRG4
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 380
  • Description: Surface Mount Tape & Reel (TR) 10mA mA 36 μs μs Linear Comparators 120dB dB 250pA pA 800nA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Max Supply Current 800nA
Quiescent Current 1μA
Response Time 36 μs
Common Mode Rejection Ratio 88 dB
Voltage - Supply, Single/Dual (±) 2.7V~16V ±1.35V~8V
Input Offset Voltage (Vos) 5mV
Voltage Gain 120dB
Power Supply Rejection Ratio (PSRR) 105dB
Supply Voltage Limit-Max 17V
Max Input Current 250pA
Input Bias Current 250pA
Voltage - Input Offset (Max) 5mV @ 15V
Current - Input Bias (Max) 250pA @ 15V
CMRR, PSRR (Typ) 88dB CMRR, 105dB PSRR
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Weight 57.209338mg
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Max Power Dissipation 720mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number TLV3704
Pin Count 14
Output Type CMOS, Push-Pull, Rail-to-Rail
Number of Elements 4
Power Supplies +-1.35/+-8/2.7/16V
Nominal Supply Current 800nA
Power Dissipation 720mW
Output Current 10mA

TLV3704IPWRG4 Overview


A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.The chip is packaged with Tape & Reel (TR) .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 4 elements in total.The pinout of the component starts from 14 pins it has.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .14 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLV3704 .The comparator presents a quiescent current of 1μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 800nA when using the device.An excess of current supply over 800nA could result in malfunction of the comparator.The device can be powered by +-1.35/+-8/2.7/16V power supplies.Input current to the device is limited to 250pA .The voltage gain of the part is indicated by 120dB in the voltage formula.This device is usually used in ADC circuits (packaged in TR ).

TLV3704IPWRG4 Features


CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB

TLV3704IPWRG4 Applications


There are a lot of Texas Instruments TLV3704IPWRG4 linear comparators applications.

  • High-Speed Sampling Circuits
  • Self-diagnostics
  • Lithium ion battery monitoring
  • Power Supervision
  • Portable and Battery-Powered Systems
  • Wide Range VCO; MOS Clock Timers
  • Window Comparators, Multivibrators
  • Limit Comparators
  • Handheld Instruments
  • Pulse, Squarewave, and Time Delay Generators

Write a review

Note: HTML is not translated!
    Bad           Good