TLV4111IDGN

320mA per Channel 0.3pA 63 dB Instrumentational OP Amps 0.0005μA 2.5V~6V TLV4111 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV4111IDGN
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 351
Description: 320mA per Channel 0.3pA 63 dB Instrumentational OP Amps 0.0005μA 2.5V~6V TLV4111 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	TLV4111
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	1
Power Supplies	3/5V
Operating Supply Current	700μA
Nominal Supply Current	1mA
Power Dissipation	2.37W
Output Current	320mA
Slew Rate	1.57V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	63 dB
Current - Input Bias	0.3pA
Voltage - Supply, Single/Dual (±)	2.5V~6V
Output Current per Channel	320mA
Input Offset Voltage (Vos)	3.5mV
Bandwidth	2.7MHz
Unity Gain BW-Nom	2700 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.0005μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	175μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Max I/O Voltage	3.5mV
Input Offset Current-Max (IIO)	0.000025μA

TLV4111IDGN Overview

The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 3.5mV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. An 700μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 110dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The op amp is rated for an operating supply voltage of 1.