TLV4111IDR
| Parameters | |
|---|---|
| Max I/O Voltage | 3.5mV |
| Power | YES |
| Input Offset Current-Max (IIO) | 0.000025μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV4111 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 1mA |
| Output Current | 320mA |
| Slew Rate | 1.57V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V |
| Output Current per Channel | 320mA |
| Input Offset Voltage (Vos) | 175μV |
| Bandwidth | 2.7MHz |
| Unity Gain BW-Nom | 2700 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
TLV4111IDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. A Cut Tape (CT) case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 3V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp rates 175μV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 700μA . It is a member of the 110dB's 110dB family. This op amp ic has 1 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For packing the buffer amplifier, the TR-axis is adopted.
TLV4111IDR Features
8 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail
TLV4111IDR Applications
There are a lot of Texas Instruments TLV4111IDR Instrumentational OP Amps applications.
- Subtraction operation circuits
- Division circuits
- Exponential operation circuits
- Car stereo
- Logarithmic operation circuits
- Proportional operation circuits
- Industrial applications including automation
- Differentiator circuits
- Signal filtering
- Television broadcasting equipment
