TLV4112IDGNRG4

320mA per Channel 0.3pA 63 dB Instrumentational OP Amps 0.0005μA 2.5V~6V TLV4112 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV4112IDGNRG4
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: -
Stock: 993
Description: 320mA per Channel 0.3pA 63 dB Instrumentational OP Amps 0.0005μA 2.5V~6V TLV4112 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	TLV4112
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Circuits	2
Operating Supply Current	700μA
Nominal Supply Current	2mA
Output Current	320mA
Slew Rate	1.57V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	63 dB
Current - Input Bias	0.3pA
Voltage - Supply, Single/Dual (±)	2.5V~6V
Output Current per Channel	320mA
Input Offset Voltage (Vos)	175μV
Bandwidth	2.7MHz
Unity Gain BW-Nom	2700 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.0005μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Max I/O Voltage	3.5mV
Power	YES
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)

TLV4112IDGNRG4 Overview

A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 175μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 700μA . There should be no change in the voltage gain at 110dB. There are 2 circuits on this op amp. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. It is used TR to pack the op amps.