TLV4113IDGQ
| Parameters | |
|---|---|
| Output Current | 320mA |
| Slew Rate | 1.57V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V |
| Output Current per Channel | 320mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 2.7MHz |
| Unity Gain BW-Nom | 2700 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 175μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Max I/O Voltage | 3.5mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 2.39W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV4113 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 2.39W |
TLV4113IDGQ Overview
Packaging for the buffer amplifier is in the form of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 10. In this case, there are 10 pins on the board. Please take in mind that this instrumentation amplifier should be run at 3V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 10 pins on this chip. Regarding input offset voltage, op amp rates 3.5mV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. Keeping the voltage gain at 110dB is the best course of action. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total.
TLV4113IDGQ Features
10 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail
TLV4113IDGQ Applications
There are a lot of Texas Instruments TLV4113IDGQ Instrumentational OP Amps applications.
- Band-stop filter
- Semiconductor detectors
- Home audio systems
- Measurements of Wheatstone bridge
- High/low-pass filter circuit
- Professional videography
- High input resistance broadband
- Ultrasound transducers
- RF cable systems
- High speed sample
