TLV4113MDGQREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV4113 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 2.39W |
| Output Current | 320mA |
| Slew Rate | 1.57V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~6V |
| Output Current per Channel | 320mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 2.7MHz |
| Unity Gain BW-Nom | 2700 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 69dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 175μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Max I/O Voltage | 3.5mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV4113MDGQREP Overview
In the package, you will find a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad-case to contain the op amp ic. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. A total of 10 terminations have been reported in the past few weeks. In this case, there are 10 pins on the board. I would like to remind you that this buffer op amp should be powered by an 3V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 10 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3.5mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -55°C~125°C. You can run this op amp ic on 700μA . 110dB should be the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. A total of 2 elements are present in this linear amplifier. The instrumentation amplifier is packed in the form of TR.
TLV4113MDGQREP Features
10 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail
TLV4113MDGQREP Applications
There are a lot of Texas Instruments TLV4113MDGQREP Instrumentational OP Amps applications.
- Multiplication circuits
- Addition operation circuits
- Instrumentation
- Industrial applications including automation
- Car stereo
- MP3
- Power transmission
- High/low-pass filter circuit
- High gain DC amplifier
- Thermocouples
