TLV4120IDGN

320mA per Channel 0.3pA 71 dB Instrumentational OP Amps 0.0003μA 2.7V~5.5V TLV4120 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV4120IDGN
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 391
Description: 320mA per Channel 0.3pA 71 dB Instrumentational OP Amps 0.0003μA 2.7V~5.5V TLV4120 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	TLV4120
Pin Count	8
Output Type	Differential
Number of Elements	1
Power Supplies	2.7/5V
Operating Supply Current	1.4mA
Nominal Supply Current	1.7mA
Power Dissipation	2.37W
Output Current	320mA
Slew Rate	1.57V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	71 dB
Current - Input Bias	0.3pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	320mA
Input Offset Voltage (Vos)	3mV
Bandwidth	2.4MHz
Unity Gain BW-Nom	1400 kHz
Voltage Gain	95dB
Average Bias Current-Max (IIB)	0.0003μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	100μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	2.4MHz
Max I/O Voltage	3mV
Input Offset Current-Max (IIO)	0.000025μA
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV4120IDGN Overview

Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 1.4mA . Voltage gain should remain at 95dB. One of its many advantages is that buffer op amp outputs Differential signals. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer.