TLV62130RGTR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLV62130 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 19μA |
| Nominal Supply Current | 19μA |
| Output Configuration | Positive |
| Quiescent Current | 19μA |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 0.9V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Max Duty Cycle | 100 % |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 46.011276mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | DCS-Control™ |
TLV62130RGTR Description
The TLV62130RGTR is a simple to use synchronous step-down DC-DC converter designed for high power density applications. By utilizing the DCS-ControlTM topology, a high switching frequency of typically 2.5MHz allows for the use of small inductors and provides a fast transient response as well as high output voltage accuracy. The devices are well-suited for systems powered by Li-Ion or other batteries, as well as 12V intermediate power rails, thanks to their wide operating input voltage range of up to 17V. It can deliver up to 3A of continuous output current at output voltages ranging from 0.9V to 5V. (with 100 percent duty cycle mode). The soft-start pin controls the output voltage startup ramp, allowing operation as a standalone power supply or in tracking configurations. Configuring the Enable and open-drain Power Good pins also allows for power sequencing. The devices display a quiescent current of roughly 19A from VIN in Power Save Mode. If the load is small, Power Save Mode is engaged automatically and seamlessly, ensuring great efficiency throughout the load range. The device is turned off in Shutdown Mode, and the shutdown current consumption is less than 2A. The device is housed in a 3 mm 16-pin QFN package (RGT).
TLV62130RGTR Features
Power Good Output
100% Duty Cycle Mode
Short Circuit Protection
DCS-Control TMTopology
Over Temperature Protection
Quiescent Current of 19μA (typ.)
Selectable Operating Frequency
Available in mm, QFN-16 Package
Programmable Soft Start and Tracking
Seamless Power Save Mode Transition
Input Voltage Range: to 3A Output Current
Adjustable Output Voltage from 0.9V to 5V
Pin-Selectable Output Voltage (nominal, + 5%)
TLV62130RGTR Applications
LDO replacement
Embedded Systems
Standard 12V Rail Supplies
Mobile PC, Tablet, Modems, Cameras spacing
POL Supply from Single or Multiple Li-Ion Battery
