TLV7211AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV7211 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 7μA |
| Output Current | 30mA |
| Max Supply Current | 7μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 18μA |
| Response Time | 10000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 40 fA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV7211AID Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type Push-Pull is used for this comparator.We ship the part through Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator consists of 1 elements in total.The board includes 8 pins.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has 8 pins.Try search TLV7211 to get more pin-to-pin solutions for your special needs.As a result, this comparator displays a quiescent current of 18μA .There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires 7μA supply current.A current supply greater than 7μA may result in the comparator malfunctioning.In accordance with the voltage formula, the part's voltage gain is 100dB .
TLV7211AID Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211AID Applications
There are a lot of Texas Instruments TLV7211AID linear comparators applications.
- Power Supervision
- High-Speed Differential Line Receiver
- Pulse, Squarewave, and Time Delay Generators
- Appliances
- Motor drives
- Automotive
- Handheld Instruments
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- Building automation
