TLV7211AIDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 15.790684mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV7211 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 7μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 18μA |
| Response Time | 10000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV7211AIDBVR Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.This comparator is of the Push-Pull output type.This device is designed in Tape & Reel (TR) case.The device is designed with 5 terminations.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type General Purpose .There are a total of 1 elements in it.As a result, it contains 5 pins.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator consists of 5 pins.You can find more pin-to-pin solutions by searching TLV7211 .In this comparator, the quiescent current is 18μA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 14μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 7μA .A maximum current of 40 fA can be supplied to the device.In accordance with the voltage formula, the part's voltage gain is 100dB .Packed in TR , this device is for general uses (often in ADC circuits).
TLV7211AIDBVR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211AIDBVR Applications
There are a lot of Texas Instruments TLV7211AIDBVR linear comparators applications.
- Hand-Held Electronics
- General Purpose Low Voltage Applications
- Security Detection Systems
- Infotainment and Clusters
- Self-diagnostics
- Body Control Modules
- Zero-Crossing Detectors
- Laptop Computers
- Appliances
- Threshold Detectors
